3 atd dial – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 64
Owner’s Manual
Rev 1.0
Page 64 of 64
2.3 ATD Dial
Description Command Possible
Responses
•_ Originate a call and
dial the phone
number specified in
the command as
<dial_string>
or
•_ Do a network detect
ATD<dial_string>[;]
•_ CONNECT
•_ CONNECT <text>
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Dial the phone number
stored in the mobile
phone which is located
by the index <I>
ATD>ME<I>[;]
•_ CONNECT
•_ CONNECT <text>
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Dial the phone number
stored in the SIM card
which is located by the
index <I>
ATD>SM<I>[;]
•_ CONNECT
•_ CONNECT <text>
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Dial the phone number
stored in the Last dialled
number list on the SIM
card, which is located by
the index <I>
The most recently
dialled number is
assumed to have
<I>="1"
ATD>LD<I>[;]
•_ CONNECT
•_ CONNECT <text>
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Redial the last phone
number dialled.
Ericsson specific
ATDL[;]
...
Used to initiate a phone connection, which may be data or voice (phone
number terminated by semicolon). The phone number used to establish the
connection will consist of digits and modifiers, or a stored number
specification.
If the dial string is followed by a semicolon this informs the phone that the
number is a voice rather than a data number.