Maintaining the battery – GE XLG3 User Manual

Page 127

Advertising
background image

118

Chapter 8 Maintenance

GE Inspection Technologies XLG3 VideoProbe System

Maintaining the Battery

To Check the Battery’s Charge Level

While the battery is in use, press the charge-check button. The green and red LEDs light
up according to the battery’s charge level, as shown here.

These two LEDs do not light up until you press the button.

To Remove the Battery

1.

Turn off the power switch.

2.

Unplug the DC power connector.

3.

Turn the quarter-turn stud counterclockwise.

4.

Remove the battery.

LED Status

Battery Charge Level

Green on

> 80%

Red on

< 80%

Red flashing

Very low

Both off

No charge

E

F

Charge-check button

Charge-level LEDs

E

F

Quarter-turn stud

DC power connector

Advertising