Changing the probe – GE XLG3 User Manual

Page 39

Advertising
background image

30

Chapter 3 Setting Up and Putting Away the System

GE Inspection Technologies XLG3 VideoProbe System

Changing the Probe

To Remove a Probe

1.

Shut down the probe.

a.

While viewing a live or frozen image, press

.

b.

Select Probe Shut Down.

2.

Open the probe latch. The probe pops out slightly.

3.

Gently slide the probe out of the handset.

To Install a Probe

1.

Open the probe latch.

2.

Slide the probe into the handset.

3.

Close the latch.

Latch
(partially open)

Advertising