GE XLG3 User Manual
Page 42
User Manual
Chapter 3 Setting Up and Putting Away the System
33
8.
Wrap handset cable around the top of the base unit.
Holding the loop in your hand, wrap the cable clockwise under the first lug. Tuck the
cable under the insertion tube. Hook it around the other lug.
9.
Pack the system into the case.
a.
Verify that no accessories or cords are installed in any of the connectors on the
front panel.
b.
Pack components securely into case so that no parts will be pinched in the lids.
c.
If you have 6-inch or 12-inch rigidizers, insert them into the holes on the back of
the case. The 6-inch rigidizer rests in the groove. The 12-inch rigidizer sticks out
at the bottom end.
d.
Close the lids.
Caution If you do not pack the system carefully, as described here, damage
might occur.