Controls, indicators, connectors, etc, Handset – GE XLG3 User Manual
Page 16
User Manual
Chapter 1 Introduction
7
Controls, Indicators, Connectors, etc.
This section describes the controls, indicators, connectors, and other key elements for
each main system component:
•
“Handset”
on page 7
•
“Control Buttons”
on page 8
•
“Probe”
on page 9
•
“Base Unit”
on page 10
•
“Case”
on page 14
Handset
The handset is your interface to the XLG3 system.
Item
Description
A. Microphone
Lets you record voice comments for video or still images.
B. Display
Large, bright, high-resolution wide-VGA LCD screen.
C. Control buttons
For details, see
“Control Buttons”
on page 8.
D. Shoulder-strap loops
Strap is an optional accessory.
E. Handset cable
Plugs into the base unit. Powers the handset, enables communication with the base unit,
and conducts light via a fiberoptic bundle from the lamp to the handset.
F. Flashlight LEDs
Provide light for reading or writing. See
“To Turn the Flashlight On and Off”
on page 29.
G. Electrical connector
Enables communication between base unit, handset, and probe.
H. Fiberoptic connector
Couples light to the probe.
I. Trigger
Same functions as the freeze/enter button
(item B. on
page 8
).
GE
Inspection T
echnologi
es
Everest XL
G3
B. Display
C. Control
buttons
G. Electrical
connector
I. Trigger
F. Flashlight LEDs
E. Handset cable
A. Microphone
H. Fiberoptic
connector
D. Shoulder-strap
loops