GE XLG3 - Manual (Page 21)

12 Chapter 1 Introduction GE Inspection Technologies XLG3 VideoProbe System
Base Unit, Sides
Item Description
A. Funnel Guides the insertion tube into the storage reel.
B. Shoulder-strap hooks Strap is included.
C. AC power inlet For connecting the power cord.
D. AC fuse Protects the circuitry when using AC power.
E. Ground lug Provides an earth ground if one is not available through the AC outlet.
F. AC output IEC-type F connector. The voltage and frequency of the power available at the AC output is
the same as the voltage and frequency applied to the inlet. Maximum output is 100 W.
G. Battery (DC) input For connecting a battery (optional).
H. Battery (DC) fuse Protects the circuitry when using a battery or other DC power source.
I. Internal memory card Card is in the drive behind the access panel. This card contains the operating system
software and the memory for storing images. This card is not user serviceable.
Left Side
C. AC power inlet
D. AC fuse
E. Ground lug F. AC output G. Battery (DC)
input
H. Battery (DC)
fuse
Right Side
B. Shoulder-strap
hooks
I. Internal
memory
card
A. Funnel