Solid State Logic Soundscape Mixer - Manual (Page 15)

Soundscape Mixpander
Page 15 of 109
an EQ in after the send. If you need one auxiliary send in a mixer column and eight in another
column, just create them as required, and so on!
Mixer controls overview
Mixer columns can have the following standard controls and buttons:
− In all cases: an input element and an output element with mute buttons, and a name field.
− On most plug-in elements (not track inserts, peakmeters or sends): a bypass button.
− On send elements: a mute button (and a pan/balance pot if the send is stereo).
− On track inserts: a track arming button (as described in the “Tutorial” chapter).
− If the output element includes a fader: a pre-fader peakmeter, a solo button, a solo group
assignment box, and a fader and mute group assignment box.
− If the mixer column has a stereo output, this output includes: a pan control (for mono in/mono to
stereo out mixer columns) or balance control (for stereo in/stereo out mixer columns), and a center
button to easily reset the pan/balance to center.
− If the mixer column has an LRCS or LRC-LsRs output: a surround panner.
Surround
panner
Fader
Output
element
Bypass
button
Input mute
button
Peakmeter
Output mute
button
Name field
Balance
Solo button
Solo group
assignment
Fader group
assignment
Send mute
button
Center
button
Input
element
Send
pan/balance