Solid State Logic Soundscape Mixer - Manual (Page 25)

Soundscape Mixpander
Page 25 of 109
It is important to take account of this when building a Mixer, because the two configurations
shown above would look the same within a mixer column:
If you need to check the input/output configuration of an existing mixer element, click on it with
the Element Info tool in Mixer Edit mode. A window containing the relevant information will be
displayed.
NOTE: The principles outlined in the examples above using mono, stereo and mono to stereo mixer
elements also apply when dealing with mixer elements that have a higher number of inputs and
outputs. For example, combining a 6 in/6 out input element and an 8 in/8 out output element within
a mixer column would result in an incorrect configuration, because inputs 7 and 8 of the output
element would be left unconnected.