Solid State Logic Soundscape Mixer - Manual (Page 36)

Soundscape Mixpander
Page 36 of 109
For mixer columns with a mono or stereo to LRCS or 5.1 output, double-clicking the output
element just next to the small surround panner, or in the output assignment box will open the
Surround Panner window:
The panner features individual pan dots for the Left (white or mono) and Right (red, stereo panner
only) input signal(s). These dots can be moved across the soundfield using the left and right mouse
buttons respectively, by clicking and dragging or by clicking at the required position in the
soundfield. The pan dots can be moved either in the small panner in the mixer column or in the
large panner window. In the large window, it is also possible to use the X and Y sliders, or the X
and Y value boxes. For surround panners with a stereo input, L and R buttons, positioned above
the X fader, indicate whether the Left or Right signal panning is currently controlled by the X and
Y faders.