Solid State Logic Soundscape Mixer - Manual (Page 84)

Soundscape Mixpander
Page 84 of 109
Status Bar
Ticking or unticking this item determines whether the Status Bar placed at the bottom of the SSL
Soundscape Mixer window will be shown as in the picture below…:
…or hidden as shown here:
NOTE: Right‐clicking the Status Bar calls up a pop‐up menu. Unticking “View Status Bar” in that
menu will also hide the Status Bar.
Small Column Size [Q]
Clicking this item (or pressing [Q] on the computer keyboard) selects a narrow view mode for the
SSL Soundscape Mixer window. More mixer columns can be displayed (e.g., 17 columns at 1024 x
768 resolution) but some controls, for instance the solo group assignment boxes and fader and
mute group assignment boxes, are hidden.
Full Column Size [X]
Clicking this item (or pressing [X] on the computer keyboard) selects a wide view mode for the
SSL Soundscape Mixer window. Less mixer columns can be displayed (e.g., 11 columns at 1024 x
768 resolution) but all the controls are shown.
Use hierarchical mixer element selection menu
When the Create tool is used in Mixer Edit mode to insert a mixer element into a mixer column, a
menu appears that lists all the available mixer elements (as described in the “Mixer” chapter). The
sheer size of this menu can make it difficult to find a particular element, especially if a lot of plug-
ins are installed or if a small monitor is used.