Solid State Logic Soundscape Mixer - Manual (Page 91)

Soundscape Mixpander
Page 91 of 109
Synchronization
This option is not applicable to the SSL Soundscape Mixpander hardware.
Specific hardware settings
When the mouse pointer is on “Specific hardware settings” submenus will be displayed allowing
hardware settings to be defined.
The example shown here is based on an SSL Soundscape Mixpander connected to an XLogic
Alpha-Link MADI SX. The AES 64-96kHz mode can be selected (4 or 8 channels per connector), the
MADI 64-96kHz mode can be switched between 96kHz legacy pattern and 96kHz frame pattern
(as defined in the AES 10-2003 document), the number of MADI channels can be set to 64 or 56 (32
or 28 at high Sample Rates) and Sample Rate Conversion can be enabled for each pair of inputs on
the AES/EBU input connector A.
The options displayed will be different for other SSL Soundscape hardware devices. Please see the
relevant hardware documentation for more details.