Solid State Logic Soundscape Mixer - Manual (Page 63)

Soundscape Mixpander
Page 63 of 109
The editable parameters are as follows:
Input section
– Lock Mid button:
If the Lock Mid mode is activated (button highlighted):
...then the relative gain of the mid MS matrix input signal is not affected by the “width” setting
(described below).
If the Lock Mid mode is not activated (button not highlighted):
...then the relative gains of the mid and side MS matrix input signals vary at the same time and in
opposite directions.
– Gain (-36.0, 6.0dB):
The overall input gain applied to both input channels.
– Width (0.00, 3.00):
Ratio expressing the gain of the side MS matrix input signal divided by the gain
of the mid MS matrix input signal.
Matrix/Routing section
– Switch Inputs button:
Interchanges the input channels before the signals reach the MS matrix (so the MS Decoder can be
used whichever input each microphone is connected to).
Switch Inputs button