Sony IPELA SNC-RZ25P - Manual (Page 32)

A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the System — System setting menu
32
Maximum wait number
Sets the number of users who can wait for their turn for
control authority during operation by one user.
Selectable number is from 0 to 10. This is effective when
“Exclusive control mode” is On.
Notes
• To use Exclusive control mode, the date and time of
the camera and the connected computer must be set
correctly at first.
• To use Exclusive control mode, do not set Cookie of
the browser to “Disable”. When “Disable” is selected,
this mode cannot be used.
• To change the settings of Exclusive control mode,
click the “Update” button of the browser to reflect the
changed contents.
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Date & time Tab
Current date & time
Displays the date and time set on the camera.
Note
After you have purchased the camera, be sure to check
the date and time of the camera and set them if
necessary.
PC clock
Displays the date and time set on your computer.
Date & time format
Select the format of date and time to be displayed on the
main viewer from the drop-down list.
You can select from among yyyy-mm-dd hh:mm:ss
(year-month-day hour:minute:second), mm-dd-yyyy
hh:mm:ss (month-day-year hour:minute:second), and
dd-mm-yyyy hh:mm:ss (day-month-year
hour:minute:second).
Adjust
Select to set the day and time.
Keep current setting: Select if you do not need to set
the date and time.
Synchronize with PC: Select if synchronizing the
camera’s date and time with those of the computer.
Manual setting: Select if you want to set the camera’s
date and time manually.
Select the lower 2-digits of year, month, date, hour,
minutes and seconds from each drop-down list.
Synchronize with NTP: Select if synchronizing the
camera’s date and time with those of the time sever
called NTP server (Network Time Protocol). Set the
NTP saver name and the Interval.
NTP server name
Type the host name or IP address of the NTP server, up
to 64 characters.
Interval
Select the interval at which you want to adjust the
camera’s time referring to the NTP server’ time,
between 1 and 24 hours. The set interval is a guide, and
does not indicate the exact time.
Note
The setting time may not accord with the exact time
according to the network environment.
Time zone
Set the time difference from Greenwich Mean Time in
the area where the camera is installed.
Select the time zone where the camera is installed from
the drop-down list.
Automatically adjust clock for daylight saving
time changes
When you select it, the clock is automatically adjusted
according to the daylight saving time of the selected
time zone.
Note
If the time zone selected on the Time zone menu is
different from that set on the computer, the time is
adjusted using the time zone difference and set on the
camera.
OK/Cancel
See “Buttons common to every setting menu” on page
29.