Sony IPELA SNC-RZ25P - Manual (Page 61)

A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Motion Detection Function — Motion detection setting Menu
61
Note
The value of Recording capacity differs depending on
Image size, Bit rate (for MPEG4) and Image quality (for
JPEG) in the camera setting menu.
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Setting the Motion
Detection Function
—
Motion detection setting Menu
When you click Motion detection on the Administrator
menu, the Motion detection setting menu appears.
You can set the conditions to activate the built-in motion
detection function in this menu.
This is the same menu with the setting menu which is
displayed when you click Motion detection in Alarm
sending of e-Mail (SMTP) setting menu, Alarm sending
or FTP client setting menu, Alarm recording of Image
memory setting menu and so on.
Note
The motion detection function can activate or be set only
when the Video mode of the camera is set to MPEG4
and the Cropping is set Off.
The Motion detection setting menu is composed of the
following five parts.
Monitor display
You can monitor the moving image and sets the
detection Window.
Window 1 to 4 check box
When you check this box, the specified Window is
displayed on the monitor display.
Threshold slider bar
Set the Threshold level so as to judge whether there has
been any motion in the camera image or not. You can
change the Threshold level displayed in the Motion
detection indicator.