Sony IPELA SNC-RZ25P - Manual (Page 39)

A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera setting Menu
39
Frame rate
Set the maximum frame rate of JPEG image that can be
monitored on the computer.
Selectable values of the frame rates are as follows.
SNC-RZ25N
5, 6, 8, 10, 15, 20, 25, 30 fps
SNC-RZ25P
5, 6, 8, 10, 15, 20, 25 fps
Image quality
Set the quality of JPEG image.
Selectable values are from Level 1 to Level 5.
When Level 5 is selected, the best picture quality is
achieved.
Bandwidth control
When the video mode is set to JPEG, the network
bandwidth can be limited. Selectable bandwidths are
0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, and Unlimited
Mbps. When you do not wish to limit the bandwidth,
select Unlimited.
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Reset Tab
Reset camera menu
Click Reset, and the message “Camera menu setting is
reset to default. Are you sure?” is displayed. To reset to
default, click OK.
Home position setting
Sets the camera position (Pantilt, Zoom and others) of
when the power is turning on. By pressing Set, the
present position is set as the home position.
When you press Reset, the home position returns to the
factory setting position.
Tip
Pan is set to face to front, Tilt is set to horizontal, and
Zoom is set to Wide as the factory default.