SUPER MICRO Computer SUPER X8STE - Manual (Page 15)

Chapter 1: Introduction
1-7
• Supports RAID 0, 1 , 10 under the Linux OS environment
SAS Connections (for the X8ST3-F only)
• Eight (8) SAS ports supported by the LSI 1068E Controller
• Supports RAID 0, 1, 5*, 10 under the Windows OS environment
• Supports RAID 0, 1 , 5*, 10 under the Linux OS environment
Notes:
1. RAID 5 is supported when the I-Button (AOC-IButton68) is installed on
the motherboard. For more information on the AOC-IButton68, please refer
to http://www.supermicro.com/products/accessories/addon/AOC-IButton68.
cfm.
2. For the LSI 1068 Controller User's Guide, please refer to http://www.
supermicro.com/support/manuals/.
Integrated IPMI 2.0 (for the X8ST3-F only)
• IPMI 2.0 supported by the WPCM450 Server BMC
Note: For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
Floppy Drive
• One (1) floppy port interface (up to 1.44 MB)
USB Devices
• Two (2) USB ports (USB 0~1) on the IO backplane for rear access
• Six (6) USB connections for front access (Two Type A connectors: USB 2,
USB 3 and two headers: USB 4/5, 6/7)
Keyboard/Mouse
• PS/2 Keyboard/Mouse ports on the I/O backplane
Serial (COM) Ports
• Fast UART 16550 Connections: one COM port and one header
Super I/O
• Winbond Super I/O 83627DHG
BIOS
• 32 MBit SPI AMI BIOS ® SM Flash BIOS
• DMI 2.3, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard and SMBIOS 2.5