SUPER MICRO Computer SUPER X8STE User Manual

Page 66

Advertising
background image

3-4

X8ST3-F/X8STE

User's Manual

BIOS warning message and the information on how to update your BIOS on our
web site. Select your motherboard model and download the BIOS ROM file to
your computer. Also, check the current BIOS revision and make sure that it is
newer than your BIOS before downloading. You may choose the zip file or the
.exe file. If you choose the zipped BIOS file, please unzip the BIOS file onto a
bootable device or a USB pen/thumb drive. To flash the BIOS, run the batch
file named "ami.bat" with the new BIOS ROM file from your bootable device or
USB pen/thumb drive. Use the following format:

F:\> ami.bat BIOS-ROM-filename.xxx <Enter>

Notes: Always use the file named “ami.bat” to update the BIOS and insert a
space between "ami.bat" and the filename. The BIOS-ROM-filename will bear
the motherboard name (i.e., X8ST3) and build version as the extension. For
example, "X8ST30.115".

When completed, your system will automatically reboot. If you choose the .exe
file, please run the .exe file under Windows to create the BIOS flash floppy disk.
Insert the floppy disk into the system you wish to flash the BIOS. Then, boot
the system to the floppy disk. The BIOS utility will automatically flash the BIOS
without any prompts. Please note that this process may take a few minutes to
complete. Do not be concerned if the screen is paused for a few minutes.

Warning

: Do not shut down or reset the system while updating the BIOS to

prevent possible system boot failure!

When the BIOS flashing screen is completed, the system will reboot and will
show “Press F1 or F2”. At this point, you will need to load the BIOS defaults.
Press <F1> to go to the BIOS setup screen, and press <F9> to load the default
settings. Next, press <F10> to save and exit. The system will then reboot.

Note: The SPI BIOS chip installed on this motherboard is not removable. To
repair or replace a damaged BIOS chip, please send your motherboard to RMA
at Supermicro for service.

Question: I think my BIOS is corrupted. How can I recover my BIOS?

Answer: Please see Appendix D, BIOS Recovery for detailed instructions.

Question: What's on the CD that came with my motherboard?

Answer: The supplied compact disc has quite a few drivers and programs
that will greatly enhance your system. We recommend that you review the CD
and install the applications you need. Applications on the CD include chipset
drivers for Windows, security and audio drivers.

Question: Is the PCI-Ex16 slot on X8 boards reserved for graphic cards
only?

Advertising
This manual is related to the following products: