SUPER MICRO Computer X6DHT-G - Manual (Page 25)

Chapter 2: Installation
2-5
Figure 2-1. PGA604 Socket: Empty and with Processor Installed
Mounting the Motherboard in the Chassis
All motherboards have standard mounting holes to fit different types of
chassis. Make sure that the locations of all the mounting holes for both the
motherboard and the chassis match. Although a chassis may have both
plastic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the
metal standoffs click in or are screwed in tightly and then, use a screw-
driver to secure the motherboard onto the motherboard tray. Note: Some
components are very close to the mounting holes. Make sure to take all
precautionary measures to prevent any damage done to these components
when you install the motherboard into the chassis.
Lever
Processor
(installed)
Triangle
Triangle
Empty socket
Warning! Make
s u r e y o u l i f t t h e
l e v e r c o m p l e t e l y
when installing the
CPU. If the lever is
only partly raised,
d a m a g e t o t h e
socket or CPU may
result.
!