SUPER MICRO Computer X6DHT-G - Manual (Page 59)

Chapter 4: BIOS
4-5
Type
This item allows the user to select the type of IDE hard drive. Select
Auto to allow the BIOS to automatically determine the hard drive's
capacity, number of heads, etc.). Enter a number from 1-39 to select a
predetermined type of hard drive, CDROM and ATAPI Removable. The
option "User" will allow the user to enter the parameters of the HDD
installed at this connection. Select CDROM if a CDROM drive is installed.
Select ATAPI if a removable disk drive is installed.
CHS Format
The following items will be displayed by the BIOS:
TYPE: This item displays the type of IDE or SATA devices.
Cylinders: This item indicates the status of Cylinders.
Headers: This item indicates the number of headers.
Sectors: This item displays the number of sectors.
Maximum Capacity: This item displays the maximum storage capacity
of the system.
LBA Format
The following items will be displayed by the BIOS:
Total Sectors: This item displays the number of total sectors available
in the LBA Format.
Maximum Capacity: This item displays the maximum capacity in the
LBA Format.
Multi-Sector Transfer
This item allows the user to specify the number of sectors per block to
be used in multi-sector transfer. The options are Disabled, 4 Sectors, 8
Sectors, and 16 Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Channel
0 Master Device via the LBA mode. The options are Enabled and Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit
data transfer. The options are Enabled and Disabled.