SUPER MICRO Computer X6DHT-G - Manual (Page 96)

C-8
X6DHT-G User's Manual
5. Press Enter when both disks for the new array are selected. The
Array Properties menu displays (as the screen shown below).
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to
the array.
*Caution: Once the array is created and its properties are assigned, you
cannot change the array properties using the ACU. You will need to use the
Adaptec Storage Manager - Browser Edition. (Refer to Adaptec's User's
Guide in the enclosed CD.
To assign properties to the new array:
1. In the Array Properties menu (as shown in the screen below), select an
array type and press Enter.
Only the available array types: RAID 0, and RAID1, are displayed on the
screen. (*RAID 0 or RAID 1 requires two drives.)