SUPER MICRO Computer X6DHT-G User Manual
Page 70
4-16
X6DHT-G User's Manual
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to redirect the console
redirection to--Onboard COM A or Onboard COM B. This setting can also
be Disabled.
BAUD Rate
This item allows you to select the BAUD rate for console redirection. The
options are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K and 115.2K.
Console Type
This item allows you to select the console type for console redirection.
The options are VT100, VT100/8bit, PC-ANSI/7bit, PC ANSI, VT100+,
VT-
UTF8.
Flow Control
This item allows you to select the flow control for console redirection.
The options are: None, XON/XOFF, and CTS/RTS.
Console Connection
This item allows you to decide how the console redirection is to be
connected: either Direct or Via Modem.
Continue CR after POST
This item allows you to decide whether to continue with console
redirection after the POST routine. The options are On and Off.