SUPER MICRO Computer X6DHT-G - Manual (Page 3)

iii
Preface
Preface
About This Manual
T h i s m a n u a l i s w r i t t e n f o r s y s t e m i n t e g r a t o r s , P C t e c h n i c i a n s a n d
knowledgeable PC users. It provides information for the installation and use
of the X6DHT-G motherboard. The X6DHT-G supports single or dual Intel ®
EM64T (Nocona TM ) processors at a 800 MHz front side bus. Based upon
Intel's NetBurst microarchitecture with EM64T support, the EM64T (Nocona)
processor supports the IA-32 software and includes features found in the
Xeon TM processor such as Hyper Pipelined Technology, allowing the pro-
cessor to operate at much higher core frequencies. Packaged in a 604-pin
Flip Chip Micro Pin Grid Array(FC-mPGA4) platform in a Zero Insertion Force
(ZIF) socket (mPGA 604), the EM64T (Nocona) Processor (800 MHz) sup-
ports Hyper-Threading Technology and is ideal for high performance work-
station and server environments with up to two processors on one system
bus. This product is intended to be professionally installed.
Manual Organization
Chapter 1 begins with a checklist of what should be included in your
mainboard box, describes the features, specifications and performance of
the motherboard and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices.
Read this chapter when you want to install the processor and DIMM memory
modules and when mounting the mainboard in the chassis. Also refer to
this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE
interfaces, the parallel and serial ports, the keyboard and mouse, the power
supply and various control panel buttons and indicators.
If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for the video, the memory and the setup configuration
stored in the CMOS. For quick reference, a general FAQ [Frequently Asked
Questions] section is provided.
Chapter 4 includes an introduction to BIOS and provides detailed informa-
tion on running the CMOS Setup utility.
Appendix A provides BIOS POST codes.
Appendix B provides software installation instructions.