SUPER MICRO Computer X6DHT-G - Manual (Page 99)

Appendix C: Software Installation
C-11
Adding a Bootable Array
To make an array bootable:
1. From the Main menu, select Manage Arrays.
2. From the List of Arrays, select the array you want to make bootable, and
press Ctrl+B.
3. Enter Y to create a bootable array when the following message is displayed:
"This will make all other existing bootable array non-bootable. Do you want to
make this array bootable? (Yes/No):" Then, a bootable array will be created.
An asterisk will appear next to the bootable array (as shown in the picture
below:
Deleting a Bootable Array
To delete a bootable array:
1. From the Main menu, select Manage Arrays.
2. From the List of Arrays, select the bootable array (*) you want to delete, and
press Ctrl+B. (* a bootable array is the array marked with an asterisk (as
shown in the picture above.)
3. Enter Y to delete a bootable array when the following message is displayed:
"The array is already marked bootable. Do you want to make this array as not
bootable? (Yes/No):" Then, the bootable array will be deleted and the asterisk
will disappear.
*Note: do not use the delete key to delete the bootable array.