Sony SAT-B3 - Manual (Page 23)

23
Using the On-Screen Displays: Highlight and Select
All of the features and functions of the Digital Satellite Receiver can be
operated using a simple, two-step process: Highlight and Select. These
two steps are explained below.
Step 1: Highlight
q
To highlight, move the joystick (SAT-A4) or press the arrow buttons
(SAT-B3) on the remote to move the on-screen to the
item that you want to select.
Step 2: Select
q After you’ve highlighted the item that you want, select it by
pressing the
button.
Example: Highlight and Select
1
In the sample menu that follows, moving the joystick up (SAT-A4)
or pressing the button (SAT-B3) moves the highlight from
ITEM 5...
... to ITEM 2.
2
Pressing the button selects ITEM 2.
You can apply this basic operation of highlighting and selecting to
perform any of the system’s functions.
highlight
ITEM 2
ITEM 5
ITEM 1
ITEM 4
ITEM 7 ITEM 8
ITEM 3
ITEM 6
ITEM 9
SAMPLE MENU
Shortcut
(SAT-A4 Only)
In many of the on-screen displays you
can move the joystick in eight
directions: left, right, up, down, and
diagonally (up left, up right, down left,
and down right).
ITEM 1
ITEM 4
ITEM 7
ITEM 2
ITEM 5
ITEM 8
ITEM 3
ITEM 6
ITEM 9
SAMPLE MENU