Sony SAT-B3 - Manual (Page 67)

67
3
After selecting the manufacturer, select the CODE type of your
VCR.
4
Select TEST to determine if the POWER ON/OFF, RECORD and
STOP functions of your VCR are working properly.
5
If the test is succesful, select OK to return to the Setup Menu. If the
test fails, check the connection between the IR Blaster and your
Digital Satellite Receiver, make sure the correct video input is
selected, and/or try a different code.
VCR RECORDING
Manufacturer
Model
Test
0
SONY CODE
Select the code for your
Sony VCR
Code
2
3
4
1
OK
HELP
CANCEL
Note:
You will need to reenter the
Manufacturer and Code each time you
enter the VCR RECORDING screen.
VCR RECORDING
Manufacturer
Code
Test
BEFORE TESTING
1) Put a tape in your VCR
xx to be RECORDED OVER
2) Select the correct VCR
xx line input
3) Turn off your VCR
Test
CANCEL
OK
OK
HELP
CANCEL