Sony SAT-B3 - Manual (Page 63)

63
Chapter 6
Using the Setup Menu
Read this chapter to set up your Digital Satellite Receiver for the first
time, check the antenna’s signal strength, or to run a system test to
diagnose any difficulties you may be having with your system.
Overview
The Setup Menu includes several options you can use to set up and
troubleshoot your system.
Use the Setup Menu to:
q
Set up and point your Satellite Antenna (page 65).
q Set up your VCR Recording feature (page 66).
q Replace your access card (page 68).
q
Change the aspect ratio of the Digital Satellite Receiver to match
your TV screen: standard or widescreen (page 70).
q
SAT-A4 Only: Change the Digital Satellite Receiver to receive RF
(radio frequency) remote control signals or IR (infrared) remote
control signals (page 71).
q
Display a list of programmable codes for other components you
may want to operate using the remote control (page 74).
q
Run a system test to check the operation of your system, including
the access card, phone line, satellite signal, and tuning (page 75).
q Display helpful troubleshooting information (page 76).
q Get hints and shortcuts on using your DirecTV System (page 76).