Sony SAT-B3 - Manual (Page 80)

80
Back Panel (SAT-B3)
Connector Description Cable Type
SATELLITE IN Connects to the LNB on the Satellite Antenna. Solid Bare Copper
RG-6 Coaxial
(75-ohm/F-type)
LOW SPEED DATA Allows you to connect your Digital Satellite Receiver to new
technologies, as they are introduced. Additional accessories may
be required.
Depends on future
applications
(D-sub 9 pin)
VCR CONTROL Sends IR signal from Digital Satellite Receiver to VCR. Allows
the Digital Satellite Receiver to automatically control your
VCR’s recording functions when you record a program.
Audio mono
miniplug
AUDIO (R)/(L)
OUT Connects your Digital Satellite Receiver to the right and left
audio inputs of your audio or video component. Audio (2)
(RCA-type)
VIDEO OUT Connects your Digital Satellite Receiver to your TV or VCR’s
video input. Video
(RCA-type)
S-VIDEO OUT Allows you to connect your Digital Satellite Receiver directly
to your TV (if your TV has S-VIDEO IN). S-Video
(4-pin mini DIN)
CH3/CH4 Switch When you use an RF connection, this setting determines the
TV channel on which programs from the Digital Satellite Receiver
can be viewed.
VHF/UHF IN Allows you to connect your Digital Satellite Receiver to your
normal (terrestrial) TV or cable TV service. RG-59 Coaxial
(75-ohm/F-type)
VHF(SAT)/UHF OUT Connects to your TV or VCR. RG-59 Coaxial
(75-ohm/F-type)
TEL LINE Connects your Digital Satellite Receiver to a telephone jack.
This allows you to order pay per view programs. Telephone (RJ-11)
AC IN Connects your Digital Satellite Receiver to a 120V AC outlet. AC
ACCESS CARD
LOW SPEED DATA
SATELLITE IN
R L(MONO)
AUDIO VIDEO
S VIDEO
CH3
CH4
VHF/UHF IN
VHF(SAT)/UHF
OUT TEL LINE
AC IN~ VCR CONTROL