SMC Networks Barricade - Manual (Page 32)

Page 29
:LQGRZV&OLHQW6HWXS
Overview
Supported versions of Windows are:
♦
Windows 95/98/ME or later
♦
Windows NT 4.0 or Windows 2000
The following items need to be checked or configured:
♦
TCP/IP protocol.
♦
Network Logon
♦
Mapping to the Barricade's storage.
♦
Network Printer installation for the Barricade's printer.
♦
Internet Access configuration.
The sample screens shown are from Windows 98. Other versions of Windows are
similar but not identical.
TCP/IP Setup
1. Select the Control Panel - Network option on the Start Menu. You should see a
screen like the one following.
Figure 10: Network Configuration
2. If a line like the one highlighted (TCP/IP -> Network card) is not listed, then
you need to install the TCP/IP protocol by selecting Add - Protocol - Microsoft
- TCP/IP - OK.