SMC Networks Barricade - Manual (Page 39)

Page 36
Internet Access via the Barricade
Each PC requiring shared Internet Access needs to be configured for:
♦
Gateway IP Address (TCP/IP)
♦
Internet Access method
♦
Proxy Server
Gateway IP Address (TCP/IP)
If using DHCP, no changes are required. Otherwise, the Gateway IP Address must
be set to the Barricade's IP Address, as described in TCP/IP Setup on page 29.
Internet Access Method
1. Select Start Menu-Settings-Control Panel-Internet Options.
2. On the Connection tab, click the Setup button.
3. Select "I want to set up my Internet connection manually, or I want to connect
through a local area network (LAN)" and click "Next".
4. Select "I connect through a local area network (LAN)" and click "Next".
5. Ensure all of the boxes on the following Local area network Internet Configu-
ration screen are unchecked.
6. Continue the Wizard, selecting any desired options, until you click the "Finish"
button.
Proxy Server Settings
The following Proxy Server settings are required.
Connection Type: HTTP
Proxy Address: IP Address of the Barricade (e.g. 192.168.123.254)
Port Number: 3128
The Proxy settings for any other protocols should be left blank.
Do NOT check Use the same proxy server for all protocols.
Procedure for Windows & Internet Explorer
1. Select Start Menu-Settings-Control Panel-Internet Options.
2. On the Connection tab, click the LAN Settings button.