Sony MVS8000SF-C - Manual (Page 13)

1-5
MVS-8000SF
Name of option Name of board Slot on the
front side
MKS-8210HD/SD/M *1 DO-41/DO-42/ 3, 8
DO-44 board
MIX-45 board 4, 9
KPC-16 board 5, 10
DI-40/DI-41/ 6, 11
DI-43 board
MKS-8170HD/SD/M DIF-119/DIF-122/ 7
DIF-141 board
MKS-8420M CC-90 board 12
MKS-8160HD/SD/M *2 OUT-23/OUT-24/ 14 , 15
OUT-27 board
MKS-8440HD/SD/M DIO-62/DIO-63/ 16
DIO-74 board
MY-102 board 17
*1 : Note when installing the MKS-8210HD/8210SD/8210M
The MKS-8210HD/8210SD/8210M must be inserted into the specified
slot only for M/E. Be sure to insert it into the correct slot without fail.
The slots into which the MKS-8210HD/8210SD/8210M can be inserted
are determined in accordance with the configuration of M/Es as shown
in the following table.
Slot M/E
SLOT 3 to 6 M/E 1
SLOT 8 to 11 PGM/PST
*2 : Relation between the slots in which OUT-23/OUT-24/OUT-27 boards
(MKS-8160HD/8160SD/8160M) are installed and OUTPUT is shown
below.
Slot OUTPUT
SLOT 14 1 to 8
SLOT 15 9 to 16
5. While closing the eject levers in the direction of arrow
1, push in the plug-in board.
6. Attach the plug-in board loose-proof assembly and the
front panel by reversing the installation steps of 2, 3.
1 1
Eject lever Eject lever
1-4. Installing the Options