Sony MVS8000SF-C - Manual (Page 43)

1-35
MVS-8000SF
1-8. Checks on Completion of Installation
TP3308 (L-12) : CK (clock for video signal) signal
(DIF-119 board)
Uses this terminal when checking the clock signal for video.
TP3309 (H-5) : CK2 signal check terminal (DIF-119
board)
Uses this terminal when checking the clock signal for video.
TP1300 (F-12), TP1400 (D-12), TP1500 (J-12) ,
TP1600 (H-12) : VCO_FRQ signal check terminal
VCO_FRQ signal measuring terminal.
TP3302 (M-13) : CKX (control timing) signal check
terminal (DIF-122 board)
CKX signal measuring terminal.
TP3303 (M-13) : VD (vertical sync) signal check
terminal (DIF-122 board)
VD signal measuring terminal.
TP3304 (K-11) : VDO signal check terminal (DIF-
122 board)
VDO signal measuring terminal.
TP3305 (K-11) : HDO signal check terminal (DIF-
122 board)
HDO signal measuring terminal.
TP3306 (K-12) : FLOEO signal check terminal
(DIF-122 board)
FLOEO signal measuring terminal.
TP3307 (K-12) : CKXO signal check terminal (DIF-
122 board)
CKXO signal measuring terminal.
TP3308 (K-12) : CK27 signal check terminal (DIF-
122 board)
CK27 signal measuring terminal.
TP3310 (H-4) : CK1 signal check terminal (DIF-122
board)
Used to check the CK1 signal.
TP3400 (A-5) : + + + + +2.5 V check terminal (DIF-122
board)
+2.5 V measuring terminal.
TP3401 (A-4) : + + + + +12 V check terminal (DIF-122
board)
+12 V measuring terminal.
TP3402 (A-4) : + + + + +3.3 V check terminal (DIF-122
board)
+3.3 V measuring terminal.
TP3403 (A-5) : + + + + +1.8 V check terminal (DIF-122
board)
+1.8 V measuring terminal.
<LED on the CPU DK module> (C-10)
Refer to < LED on the CPU DR module > in “1. CA-44
board”.
<Switch on the CPU DK module> (C-10)
Refer to < Switch on the CPU DR module > in “1. CA-44
board”.