Sony MVS8000SF-C - Manual (Page 59)

1-51
MVS-8000SF
<TEST terminal>
E1 (N-2), E2 (P-6), E3 (P-10), E4 (H-6), E5 (F-3), E6 (A-5),
E7 (C-12) : GND terminal
Use this terminal as the earth point for measuring the
respective check terminals.
TP1 (A-3) : + + + + +12 V check terminal
+12 V measuring terminal.
TP101 (P-12), TP102 (J-6), TP103 (J-13), TP104 (D-13) :
CK (clock for video) signal check terminal
Uses this terminal when checking the clock signal for video.
TP201 (L-12) : VD (vertical sync) signal check
terminal
VD signal measuring terminal.
TP202 (L-12) : CKX (control timing) signal check
terminal
CKX signal measuring terminal.
TP203 (L-12) : HD (horizontal sync) signal check
terminal
HD signal measuring terminal.
TP204 (L-12) : FLOE (field odd even) signal check
terminal
FLOE signal measuring terminal.
TP9001 (A-4) : + + + + +1.8 V check terminal
+1.8 V measuring terminal.
TP9501 (A-4) : + + + + +3.3 V check terminal
+3.3 V measuring terminal.
TP1001 (D-11), TP1501 (E-11) : ERR check terminal
SDI signal error measuring terminal.
1-8. Checks on Completion of Installation