Sharp UX-340LM User Manual

Page 16

Advertising
background image

Loading the Imaging Film

14

6

Remove the new roll of imaging film

from its packaging.

Do not yet remove the band that
holds the rolls together.

7

Insert the large gear into the green

end of the empty spool. Make sure
the two protrusions on the large
gear fit firmly into the slots in the
end of the spool.
Insert the remaining three gears
into the spools, making sure the
protrusion on each gear fits firmly
into one of the slots in the end of
each spool.

If needed, pull the spools apart
slightly to allow the gears to fit (the
band will stretch).

Slot

Protrusion

Large gear

4

Remove the used film from the

cartridge.

5

Remove the four green gears from

the used film.
DO NOT DISCARD THE FOUR
GREEN GEARS!

3

Remove the imaging film cartridge

from the print compartment (grasp
the handle at the front of the
cartridge) and turn it over.

all_ux340lm.book Page 14 Tuesday, November 28, 2000 3:09 PM

Advertising