Sharp UX-340LM User Manual
Polling (Requesting a Fax Transmission)
Being polled (polling
To let another fax machine poll your
fax, press the RECEPTION MODE
key to set the reception mode to FAX
and load the document(s).
Transmission will take place when the
other fax machine calls your machine
and activates polling. Automatic
reception is possible while your fax is
on polling standby.
Polling Security allows you to prevent
unauthorized polling of your machine.
When this function is turned on,
polling will only take place when the
fax number of the polling fax machine
has been entered in your machine's
list of permitted fax numbers (called
"passcode numbers"). The number of
the polling fax must also be correctly
programmed into itself for
Press these keys:
Press 1 to turn polling security on,
or 2 to turn it off.
Press the START/MEMORY key
and then the STOP key.
Press Rapid Key 04/POLL.
If you used the handset, replace it
when POLLING appears in the
display. Reception will begin.
To use Polling Security, follow the
steps below to turn the function on,
and then enter permitted numbers as
shown on the following page.
all_ux340lm.book Page 84 Tuesday, November 28, 2000 3:09 PM