Sharp UX-340LM User Manual
Sending a Fax by Automatic Dialing
Load the document(s).
Set the resolution and/or contrast if
Press the HOLD/SEARCH key and
then the 1 key.
Enter the first letter of the stored
name by pressing the appropriate
number key (the key below the
marked letter) one or more times
until the letter appears in the
display. If the name begins with a
special character or number, press
If you don’t remember the first
letter, go to Step 4 (you will scroll
through the list from the beginning).
If a name wasn’t stored for the
number, press 0. This will cause
numbers, not names, to appear
when you scroll.
Press the # key or the
scroll through the names (numbers
if you pressed 0). Stop when the
desired name appears in the
If no names have been stored that
begin with the entered letter, you
will scroll from the next name, in
alphabetical order, in the list. If no
names/numbers have been stored
at all, NO DATA will appear.
Press the START/MEMORY key.
The document will be automatically
transmitted once the connection is
READY TO SEND
all_ux340lm.book Page 50 Tuesday, November 28, 2000 3:09 PM