Sharp UX-340LM - Manual (Page 39)

37
3. S
ending
Doc
u
ments
5.5"
(140 mm)
5.8"
(148 mm)
8.5"
(216 mm)
23.6"
(600 mm)
14 lbs.
(52 g/m² )
42 lbs.
(157 g/m²)
11"
(279 mm)
8.5"
(216 mm)
21.5 lbs.
(80 g/m²)
3. Sending Documents
Transmittable Documents
Size and weight
The size and weight of documents
that you can load in the document
feeder depend on whether you load
one page at a time or several pages
at once.
Loading one page at a time:
Minimum size Maximum size
Minimum weight Maximum weight
5.5"
(140 mm)
5.8"
(148 mm)
14 lbs.
(52 g/m² )
Loading several pages at once:
Minimum size Maximum size
Minimum weight Maximum weight
Note: Letters or graphics on the
edges of a document will not be
scanned.
0.16"(4 mm) 0.16"(4 mm)
0.2"(5 mm)
0.2"(5 mm)
Letters in
the shaded
area will not
be scanned.
Other restrictions
♦
The scanner cannot recognize
yellow, greenish yellow, or light blue
ink.
♦
Ink, glue, and correcting fluid on
documents must be dry before they
pass through the document feeder.
♦
All clips, staples, and pins must be
removed from documents before
loading in the feeder. If these are
not removed, they may damage the
machine.
♦
Documents which are patched,
taped, torn, smaller than the
minimum size, carbon backed,
easily smudged, or have a slippery
coated surface should be
photocopied, and the copy loaded
in the feeder.
all_ux340lm.book Page 37 Tuesday, November 28, 2000 3:09 PM