Sony STR-DA9000ES - Manual (Page 27)

masterpage:Right
filename[\\Nas-data-server\sony current jobs\SONY STR-DA9000ES\DTP\STR-DA9000ES
GB\GB04BSC_STR-DA9000ES-U.fm]
27 GB
model name1[STR-DA9000ES]
[4-249-349-11(1)]
Ampl
ifier O
p
erati
o
n
4
Touch b to display screen 2/3.
5
Touch DIRECT.
6
Touch the numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Touch 1 b 0 b 2 b 5 b 0
(You do not have to enter the last “0” when
the tuning scale is set to 100 kHz.)
Example 2: AM 1,350 kHz
Touch 1 b 3 b 5 b 0
(You do not have to enter the last “0” when
the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right frequency.
If not, repeat step 6. If the entered numbers still
flash, the frequency is not used in your area.
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Rotate INPUT SELECTOR to select
tuner (“FM” or “AM”).
2
Press FM/AM to select “FM” or “AM”.
3
Tune in the station that you want to
preset using Automatic Tuning
(page 26) or Direct Tuning (page 26).
Switch the FM reception mode if necessary
(page 26).
4
Press MEMORY/ENTER.
“MEMORY” appears in the display for a
few seconds. Do steps 5 to 6 before the
display goes out.
5
Press PRESET TUNING + or PRESET
TUNING – to select a preset number.
If you want to switch the memory page,
press SHIFT on the remote.
If “MEMORY” goes out before you select
the preset number, start again from step 4.
6
Press MEMORY/ENTER again.
The station is stored to the selected preset
number.
If “MEMORY” goes out before you press
MEMORY/ENTER, start again from step
4.
7
Repeat steps 2 to 6 to preset another
station.
Tuning to preset stations
1
Rotate INPUT SELECTOR to select
tuner (“FM” or “AM”).
2
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Presetting radio stations
continued