Sony STR-DA9000ES - Manual (Page 37)

Ad
v
a
nc
ed Adjustme
nts an
d Setti
ng
s
masterpage:Right
filename[\\Nas-data-server\sony current jobs\SONY STR-DA9000ES\DTP\STR-DA9000ES
GB\GB06ADV_STR-DA9000ES-U.fm]
37 GB
model name1[STR-DA9000ES]
[4-249-349-11(1)]
You can switch the audio input mode for
components for which this receiver has digital
audio input jacks.
1
Rotate INPUT SELECTOR to select the
input.
2
Press INPUT MODE repeatedly to
select the audio input mode.
The selected audio input mode appears in
the display.
Audio input modes
• AUTO 2CH
Gives priority to the digital audio signals
input to the DIGITAL COAXIAL jack,
DIGITAL OPTICAL jack, and to the AUDIO
IN (L/R) jacks in the order. When there is no
digital audio signals, the analog audio signals
input to the AUDIO IN (L/R) jacks is
selected.
• COAXIAL FIXED
Specifies the digital audio signals input to the
DIGITAL COAXIAL jack.
• OPTICAL FIXED
Specifies the digital audio signals input to the
DIGITAL OPTICAL jack.
• ANALOG 2CH FIXED
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
Notes
• You cannot select the digital audio input which is
assigned to another function by DIGITAL ASSIGN
function (page 36).
• Some of the audio input modes do not appear
depending on the input.
By adjusting the SURR SET UP menu and
LEVEL menu, you can customize the sound
fields to suit your particular listening situation.
Note on the displayed items
The setup items you can adjust in each menu
vary depending on the sound field. Certain setup
parameters may be dimmed in the display. This
means that the selected parameter is either
unavailable or fixed and unchangeable.
Adjusting the SURR SET UP
menu
You can customize the surround effects of the
selected sound field. The settings are stored
individually for each sound field.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
2
Rotate MAIN MENU to select “SURR
SET UP”.
3
Rotate MENU to select the parameter.
For details, see “SURR SET UP menu
parameters” below.
4
While monitoring the sound, rotate –/+
to adjust the selected parameter.
5
Repeat steps 3 and 4 to adjust the other
parameters.
SURR SET UP menu parameters
x EFFECT LEVEL XXX%
(Effect level)
Initial setting: 100%
Higher settings apply more surround effect. You can
adjust from 20 % to 120 % in 5 % steps.
x A.F.D. 2CH SW
(Creating, low frequency signals)
• CREATE
Lets you create low frequency signals for
output to the subwoofer when “A.F.D.
AUTO” is selected.
• OFF
Low frequency signals are not created.
Switching the audio input
mode for digital
components
— INPUT MODE
Customizing sound fields
continued