Sony STR-DA9000ES - Manual (Page 46)

masterpage:Left
filename[\\Nas-data-server\sony current jobs\SONY STR-DA9000ES\DTP\STR-DA9000ES
GB\GB06ADV_STR-DA9000ES-U.fm]
46 GB
model name1[STR-DA9000ES]
[4-249-349-11(1)]
This receiver features the custom install modes
described below. Depending on how you intend
to use these features, use of these modes may
require additional equipment (available
separately) or modification of your listening
environment. Please consult the retailer where
you purchased this receiver for more
information.
1
Rotate MAIN MENU to select “CIS”.
2
Rotate MENU to select the parameter.
For details, see “CIS menu parameters”
below.
3
Rotate –/+ to select the setting you
want.
4
Repeat steps 2 and 3 to adjust the other
items.
CIS menu parameters
Initial settings are underlined.
x 2ND ZONE (2nd zone source)
x 3RD ZONE (3rd zone source)
Lets you select the source signals (analog audio and
video signals for 2nd zone; only analog audio signals
for 3rd zone) you want to output in the 2nd zone or 3rd
zone (except PHONO and i.LINK). When you select
“SOURCE”, the signals of the current input is output.
Tips
• Only signals from components connected to the
analog input jacks are output through the 2ND ZONE
or 3RD ZONE jacks. No signal is output from
components connected to only the digital input jacks.
• When “SOURCE” is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the 2ND ZONE or 3RD ZONE jacks even when
MULTI CH IN function is used. The 2 channel
analog audio signals of the current input is output.
x INSTALLER MODE (RS232C control)
• ON
The receiver can receive commands from the
RS232C port even when the power is off (standby
mode).
• OFF
The receiver does not receive commands from the
RS232C port when the power is off (standby mode).
x 12V TRIG. MAIN
(12 V trigger for the main receiver)
x 12V TRIG. 2ND
(12 V trigger for the 2nd zone)
x 12V TRIG. 3RD
(12 V trigger for the 3rd zone)
x 12V TRIG. EX1
(12 V trigger for the other zone 1)
x 12V TRIG. EX2
(12 V trigger for the other zone 2)
Lets you turn on or off the external equipment by
outputting 12V triggers (5 outputs) when the receiver
is turned on or off. For example, you can automatically
unroll your video screen when you turn on the receiver.
• OFF
Lets you turn off output of 12V triggers even when
the main receiver is turned on.
• CTRL
Lets you turn on or off the output of 12V triggers
manually by the CIS command of the IR remote or
RS232C control.
• ZONE (for “12V TRIG. MAIN”, “12V TRIG. 2ND”
and “12V TRIG. 3RD” only)
Lets you turn on output of 12V triggers when the
main receiver or the receiver in each zone is turned
on.
• INPUT (for “12V TRIG. MAIN” only)
Lets you turn on output of 12V triggers when the
main receiver is turned on, depending on the setting
of each input. See “To set the 12V trigger setting for
each input”.
• MAIN (except for “12V TRIG. MAIN”)
Lets you link 2nd or 3rd zone trigger operation to the
main receiver.
To set the 12V trigger setting for
each input
The initial setting is “OFF” for all inputs. To set
this setting, you can use only the controls on the
front panel.
1 Select “INPUT” in “12V TRIG. MAIN”.
2 Press MEMORY/ENTER.
3 Rotate MENU to select the input.
4 Rotate –/+ to select “ON” to activate 12V
trigger or select “OFF” to disactivate.
5 Press MEMORY/ENTER.
Custom install mode