Sony BBV RX100 - Manual (Page 35)

Rx100 installation manual V1.17 29 Aug 08.doc Page 35
BBV Rx100
Interface Receiver
Addendum to manual for the following domes:
Videcon Dome
Rx100 software RX1_V4V2
Application Notes
The RX 100 provide the following functionality when controlling the above mentioned dome
Variable speed Pan/Tilt.
16 Full scene presets.
2 RX100 preset patrols.
Pattern Tour 1 learn and playback using AUTOPAN
Privacy zone support
IR Filter CUT using LIGHTS is link J6/1-2 fitted. Lights ON = FILTER OFF, Lights OFF = FILTER ON
Advanced Features
Tx400 Tx1000 Tx1500 DM DS/DS2/BX2 Mux
Display MENU ‘#’ 1 '#' WASH 1 ’#’ *889 002 or *889 10 10 2
Display Privacy Menu ‘#’ 2 '#' WIPE 2 ’#’ *889 003 or *889 10 10 3
Record Pattern Tour 1 ‘#’ 3 '#' AUTOPAN 3 ’#’ *889 004 or *889 10 10 4
Stop Recording ‘#’ 4 ‘#’ LIGHTS 4 ‘#’ *889 005 or *889 10 10 5
Pattern Tour 1 playback = press AUTOPAN
The dome and Rx100 are linked using RS485 for control and video for the camera signal.
Rx100
Description Dome connection
J3-C1 TX-/B D-
J3-C2 TX+/A D+
Notes:
The dome switches must be as follows to select Pelco P, 9600 baud and address 1.
SW1, 1 ON, 2-7 OFF. SW2, 1 & 2 ON, Protocol switch 1-4 all OFF
The alarm output relay opens for approx 5 seconds upon power up and following any active alarm input.
When navigating the dome’s menu or privacy setup use the joystick and IRIS OPEN and CLOSE.
The dome manual has detailed information on the menu structure and privacy setting.
J6 Links
J6/1-2 fitted to allow LIGHTS to switch the IR CUT filter ON/OFF when used with a day/night dome.