Sony BBV RX100 User Manual

Page 4

Advertising
background image

Rx100 installation manual V1.17 29 Aug 08.doc

Page 4

Damage Requiring Service - Servicing by qualified personnel should be carried out under the following
conditions:
(a)

When the power-supply cord or plug is damaged.

(b)

If liquid has been spilled or objects have fallen into the unit

(c)

If the internal electronics of the unit have been exposed to rain or water

(d)

If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the unit to
normal operation.

(e)

If the unit has been dropped or the enclosure is damaged.

(f)

If the unit exhibits a distinct change in performance. This indicates a need for service.


Replacement Parts - If replacement parts are required, ensure that only replacement parts recommended by the
product manufacturer are used.

Safety Check - Upon completion of any service or repairs to the unit, safety checks should be performed to
ensure that the unit is in proper operating condition.

Pre-installation Checks - It is recommended that the unit be bench-tested prior to installation on the site.

Safety During Installation or Servicing - Particular care should be taken to isolate the dome in order to prevent
operation while engineering work is being carried out on the Rx100.

Adhere to Safety Standards - All normal safety precautions as laid down by British Standards and the Health
and Safety at Work Act should be observed.

WARNING

TO PREVENT DANGER OF FIRE OR SHOCK, DO NOT EXPOSE THE INTERNAL COMPONENTS OF THIS

EQUIPMENT TO RAIN OR MOISTURE.


The “lightning flash with arrowhead” symbol inside an equilateral triangle is used to warn the user of this
equipment that there are sufficiently high voltages within the enclosure to constitute a risk of electric shock.

The “exclamation point” symbol inside an equilateral triangle is used to alert the user of this equipment to
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Advertising