Sony MKS-2010 - Manual (Page 116)

Cha
p
te
r 6
Ad
v
a
nce
d Op
er
a
tio
ns
116
Color Correction
Tint: Add a specified color to the original video
signal.
Color Modify: Adjust the original video signal.
Y Modify: Adjust the output levels of the input
luminance signal.
4
If you selected [Tint] or [Color Modify], proceed to
step 5. If you selected [Y Modify], adjust the
following parameters.
5
Press [Bound Level] or [Bound Soft], and make
settings for the three regions (Dark, Middle, Bright).
[Bound Level] parameters:
Set the boundaries of the three regions.
[Bound Soft] parameters:
Set the degree of boundary softness of the three
regions.
6
Press [Dark], [Middle], or [Bright] to select a region,
then adjust the following parameters.
Tint mode:
Color modify mode:
To return luminance processing parameters to
their default settings
Press [Unity].
To mask part of the luminance processing
Press [Mask] in the Luminance Process menu, turning it
on. Then proceed as explained in “To mask part of the
primary color correction” (see page 114).
Knob Description Setting values
1 (White) White balance 0.00 to 200.00
2 (Black) Black balance –100.00 to +100.00
3 (Y Lift) Curvature of
luminance level
curve –100.00 to +100.00
4 (Y Dark) Position of maximum
point of luminance
level curve –7.30 to +109.58
Knob Description Setting values
1 (Over B Lvl) Luminance level at
upper limit of Bright
region 50.00 to 150.00
2 (Mid B Lvl) Luminance level at
boundary between
Bright and Middle
regions 10.00 to 120.00
3 (D Mid Lvl) Luminance level at
boundary between
Middle and Dark
regions –20.00 to +90.00
Output signal
luminance
level
White
balance
adjustment
Input signal
luminance
level
Black balance
adjustment
Y Dark
Signal before
adjustment
Signal after
adjustment
Output signal
luminance
level
Input signal
luminance level
Y Lift
4 (Under D Lvl) Luminance level at
lower limit of Dark
region
–50.00 to +50.00
Knob Description Setting values
1 (Over B Soft) Degree of softness
at upper limit of
Bright region 15.00 to 70.00
2 (Mid B Soft) Degree of softness
at boundary
between Bright and
Middle regions 15.00 to 42.50
3 (D Mid Soft) Degree of softness
at boundary
between Middle
and Dark regions 15.00 to 42.50
4 (Under D Soft) Degree of softness
at lower limit of
Dark region
15.00 to 70.00
Knob Description Setting values
1 (Lum) Luminance –100.00 to +100.00
2 (Sat) Saturation 0.00 to 100.00
3 (Hue) Hue 359.99 to 0.00
Knob Description Setting values
1 (Lum) Luminance –100.00 to +100.00
2 (C Gain) C signal gain 0.00 to 200.00
3 (Hue Delay) Hue delay –180.00 to +180.00
Knob Description Setting values