Sony MKS-2010 - Manual (Page 72)

Cha
p
te
r 5
Ba
si
c Op
erat
io
ns
72
Preparing Transitions
To select effect directions with the Effect/Wipe control block
To select the normal direction: Turn both the [REV] button and [N/R] button
off, so that they are not lit.
To select the reverse direction: Press the [REV] button so that it lights, and the
[N/R] button so that it is not lit.
To select the normal/reverse direction: Press the [N/R] button so that it lights .
To select effect directions from menus
1
From the top menu, select Effect/Wipe >M/E Effect >Main.
The Main menu appears.
2
Select one of the following.
To select the normal direction: Turn both [Norm/Rev] and [Reverse] off.
To select the reverse direction: Turn [Reverse] on, and turn [Norm/Rev]
off.
To select the normal/reverse direction: Turn [Norm/Rev] on.
1 M/E panel 1.5 M/E panel
N/R button
N/R button
REV button
REV button