Sony MKS-2010 - Manual (Page 48)

Cha
p
te
r 4
B
asi
c
s
of
Vi
deo
Swi
tc
h
in
g
48
Basic Operations (2): Video Switching on the PGM/PST Bank — For 1.5 M/E Systems
1
In the PGM row of the PGM/PST cross-point control block, press the [M/
E] button at the right edge.
The [M/E] button lights in red, and the output video of the M/E bank (the
lion) is selected as the PGM bus video. At this stage, the 3rd button from the
left in the background A row on the M/E cross-point control block also
lights in red.
2
In the PST row, press the 4th button from the left.
The button lights in amber, and the castle video is selected as PST bus video.
3
In the PGM/PST transition control block, press the [WIPE] transition type
selection button, lighting it.
Wipe is selected as the transition type.
4
Select pattern number 0001.
When you use the Flexi Pad control block, procced as follows.
1) Press the [PP/ALL] button, lighting it.
2) Press the [EFF/WIPE] button, lighting it.
3) Press the [PTN NO.] button, lighting it in green.
4) With the numeric buttons, enter the digit 1.
The number that you entered appears in the numeric display.
5) Press the [ENTR] button.
Pattern number 0001 is selected.
5
In the PGM/PST transition control block, slowly move the fader lever
down. Or, press the [AUTO TRANS] button.
The wipe transition starts. On the program monitor screen, the video of the
castle gradually moves in from the left of the video of the lion. When the
transition completes, the lion video is gone and the castle video occupies the
entire screen.
At this stage, the colors of the lit cross-point buttons are as follows.
• 4th button from the left in the PGM row (selecting the castle video
signal): Red
• [M/E] button at the right edge of the PST row (selecting the M/E output
signal): Amber
• 3rd button from the left in the background A row on the M/E cross-point
control block: Amber