Sony MKS-2010 - Manual (Page 191)

Ch
ap
te
r 9
Sys
tem Set
tings
191
Other Settings
a) 1: Video Port (port associated with the serial port being set. The
output port of a player, and the input port of a recorder.)
2: Maximum Open Delay (maximum time required to open a file)
3: Maximum Cueup Delay (maximum time required to cue up a file)
4: Play After Cueup Delay (delay time from the cued-up state to
begin playback)
5: Stop Delay (delay time from Stop command to actual stop)
4
Turn knob 4 to set the video port or the response time.
a) 0: No assignment
5
Press [Set].
The setting is confirmed.
Making detailed settings for Extended VTRs
For Extended VTRs, settings are required to specify
response times until command execution.
The status area of the Port Setting menu for Extended VTR
devices shows information about the selected port and a
list of response times.
Extended VTR detailed settings screen
1
Using any of the following methods, select a response
time to set.
• Press directry on the list in the status area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knob.
a) 1: Maximum Open Delay (maximum time required to open a file)
2: Maximum Cueup Delay (maximum time required to cue up a file)
3: Play After Cueup Delay (delay time from the cued-up state to
begin playback)
4: Stop Delay (delay time from Stop command to actual stop)
2
Turn the knob to set the response time.
3
Press [Set].
The setting is confirmed.
Knob Description Setting values
3 (No) Setting item selection
1 to 5 a)
Knob Description Setting values
4 (Setting) Video port number
setting
0 to 127 a)
Response time 0 to 255
Knob Description Setting values
3 (No) Setting item selection
1 to 4
a)
Knob Description Setting values
4 (Setting) Response time 0 to 255