Sony MKS-2010 - Manual (Page 168)

168
Other Settings
Ch
a
p
te
r
9
Sys
te
m
Set
tin
gs
2
Select the output port number for which you want to
make the setting.
• Press directry on the list in the status area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knob.
a) Values 5 to 8 are only valid when the MKS-2110M (option) is
installed.
The selected output port number appears in reverse
video.
3
Press [Output Clip].
4
Turn the knobs to adjust the parameters.
To reset the settings to the default values
Press [Default]. All parameters, White, Dark, and
Chroma for the output signal currently being set are
returned to their default values.
Making vertical blanking width and
through mode settings
1
From the top menu, select Setup/Diag >Input/Output
>V Blank/Through.
The V Blank/Through menu appears. The status area
shows the output port numbers, and for each port the
assigned output signal, vertical blanking width, and
through mode setting.
2
Select the output port number for which you want to
make the setting.
• Press directry on the list in the status area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knob.
a) Values 5 to 8 are only valid when the MKS-2110M (option) is
installed.
The selected output port number appears in reverse
video.
3
Press [V Blank].
4
Turn the knobs to adjust the parameters.
a) When signal format is 480i/59.94
b) When signal format is 576i/50
c) For any signal format with valid scan lines of 1080i or 1080PsF
d) When signal format is 720p/59.94
To reset the settings to the default values
Press [Default].
5
To carry out the through mode setting, press [Thru
Mode], toggling it between Enable and Disable.
Enable: Enable the through mode.
Disable: Disable the through mode.
Notes
• The through mode setting can only be made for the
following output signals.
Knob Description Setting
values
1 (No) Output port number selection 1 to 8 a)
Knob Description Setting
values
2 (White) Luminance signal white clip
value 90.00 to
109.02
3 (Dark) Luminance signal dark clip
value –6.85 to
+10.00
4 (Chroma) Chrominance signal clip
value 90.00 to
113.17
Knob Description Setting
values
1 (No) Output port number selection 1 to 8 a)
Knob Description Setting
values
2 (Mask End) Last line of vertical
blanking interval
10 to 19
a)
6 to 22 b)
7 to 20
c)
7 to 25 d)