Sharp UX-D50 - Manual (Page 117)

PBX operations
115
7. Spec
ial
F
unc
tions
PBX operations
If your fax is connected to a PBX, you can use it to perform the following
operations:
Making enquiry calls: During a call, you can put the other party on hold,
make a further call to a third party, and then go back to your original caller.
Transferring calls: You can transfer a call to another number on the same
PBX without operator assistance.
Making enquiry calls
1
During the telephone conversation, press on the fax machine if
you are using the fax machine cordless handset, or on the
cordless handset. This puts the other party on hold.
2
When you hear the dial tone, dial the number of the third party for the
enquiry call.
3
When you have finished the enquiry call, you will be automatically
returned to the original caller as soon as the third party hangs up.
R
Transferring calls
1
During the telephone conversation, press on the fax machine if
you are using the fax machine cordless handset, or on the
cordless handset. This puts the other party on hold.
2
When you hear the dial tone, dial the number to which you want to
transfer the call. When the other party answers, hang up, and the call
will be transferred.
•
If the other party does not answer, press or again to return to
the original caller.
R
R
all.book Page 115 Monday, September 1, 2003 3:46 PM