Sharp UX-D50 - Manual (Page 44)

Storing and Using Auto-Dial Numbers
42
1
Enter the first 3 letters of the name of the auto dial number that you wish
to dial. To enter each letter, hold down the number key with the desired
letter until the letter appears in the display.
•
If you do not wish to enter all 3 letters, you can press and then enter
one letter. (If a different name appears in the display, press or
until the desired name appears.)
2
The name of the auto-dial number that begins with those 3 letters
appears. (If there is no name that begins with those letters, the closest
name will appear).
•
If the correct name does not appear, press or until it appears.
3
Press .
•
The number is automatically dialed.
Quick Search
You can also quickly dial an auto dial number by entering the first 3 letters of
the name.
all.book Page 42 Monday, September 1, 2003 3:46 PM