Sharp UX-D50 - Manual (Page 140)

Quick Reference Guide
138
Using the Cordless Phone
Making a phone call
1. Pick up the cordless handset and press
.
2. When you hear the dial tone, dial the
number.
3. When you are ready to end the call,
press .
Making a phone call using automatic
dialling
1. Press once.
2.Press or until the number you
wish to dial appears in the display.
3. Press .
Receiving a phone call
1. When the cordless handset rings, pick it
up and press .
2. When you are ready to end the call,
press .
Receiving a fax using the cordless
handset
If you hear a fax tone after answering a
call on the cordless handset, or if the
other party speaks to you and then
wants to send a fax, press .
Storing auto dial numbers
1. Press and then press twice.
2. Enter a name for the auto-dial
number. To enter each letter, hold
down the key for the letter as shown in
the chart below until the letter appears
in the display.
3. Press .
4. Enter the full fax/phone number.
To clear a mistake, press .
To insert a pause, hold down until
“xx” appears .
5. Press and then repeatedly to
exit .
Listening to messages
1. Press and then press .
2. Press to listen to all your
messages, or to listen to only your
new messages.
3. While listening, you can do the following:
Repeat a message: Press .
Skip a message: Press .
Delete a message: Press while the
message is playing.
Stop playback: Press .
4 When finished, press repeatedly to
exit.
A, B, C =
D, E, F =
G, H, I =
SPACE =
J, K, L =
M, N, O =
P, Q, R, S =
W, X, Y, Z =
T, U, V =
all.book Page 138 Monday, September 1, 2003 3:46 PM