Sharp UX-D50 User Manual

Page 76

Advertising
background image

Transfer Function

74

6

Each time the machine receives an incoming message, it will call your
programmed transfer number. When you answer, you will hear your
recorded message telling you that the call is a transfer call. On the dial

pad of your phone, enter

, your remote code number (see page 75),

and

. The machine will play back your messages.

You can also perform any of the remote operations described in Remote
Operations
later in this chapter (see page 75).

Note: When you hang up after a transfer call, the machine will not
immediately resume normal operation. If you want the machine to accept calls

immediately after a transfer call, enter

twice before hanging up (if you

want to hang up during message playback, first enter

and

to stop

playback, then enter

twice).

0

all.book Page 74 Monday, September 1, 2003 3:46 PM

Advertising